Drawer Dividers, Trays, Labels and Spool Holders for Ridgid Pro Gear 2.0 System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trays and dividers to fit the Ridgid Pro Gear 2.0 Drawer toolbox. Should also fit Keter, Magnusson and other rebrands.
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 602
- Wydruki
- 3
- Wyświetlenia
- 3370
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Trays, dividers and labels to fit the Ridgid Pro Gear 2.0 Drawer toolbox. Should also fit Keter, Magnusson and other rebrands.
You'll probably need to print the divider on the diagonal, and the trays standing up at 45 degrees with some support to keep it from falling over. Model for left tray can be mirrored to fit on the right.
Use your slicer to add text to the drawer labels – use negative part to make the text sunk in, or make the text part a modifier to print in multiple colors. Try the “face-down” model first, but if you have trouble with the tabs snapping off, use the “standing model”
Spool holders are for the full size parts organizer. Will accommodate spools up to about 75mm in diameter and up to about 90mm width. Rod diameter is 13mm. Drop the rod's z-position, into the plate slightly in your slicer for a flat bottom and easier print. I used this OpenSCAD model to generate spools: https://www.thingiverse.com/thing:1782398
Original files can be found on OnShape
https://cad.onshape.com/documents?nodeId=a14d680dd4d930050a4e242e&resourceType=folder