1 / 5
JEEP Renegade rear license plate mount extenders for M6 nut
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JEEP Renegade rear license plate mount extenders for M6 nut to be pressed in. Allowing to mount standard sized US WA…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
JEEP Renegade rear license plate mount extenders for M6 nut to be pressed in.
Allowing to mount standard sized US WA license plate firm using all 4 sockets.
M6 nuts need to be pressed in using vise (I'm using large pliers). You also need to find two low profile short screws to mount extenders. Finally, mount bottom plate using two short M6 bolts with two washers.
Category: Automotive