1 / 1
FTX Carnage / Hooligan Nt / Zorro Nt Centre Spur Gear 50T FTX6424
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Spur Gear for Nitro FTX RC Cars
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Stripped the spur gear on my Nitro FTX Zorro so I recreated it to 3D Print.
The dimensions are exact to the real spur gear, you may need to scale up the design in your slicer. I had to scale up by 1.5%, this is very important if you want to use Nylon like I did which can shrink a lot. I'm not sure how well other plastics will stand up to it.
I have no idea if this fits on the electric versions of these cars, however I wouldn't recommend it if they can as there is a lot more stress on the gear in those.
