1 / 18
Meshtastic Muzi H1 REMIX - 1100mAh Version (No branding+ No Keyhole + optional Buzzer+ navigation switch + Belt clip) — zdjęcie 1
1 / 18

Meshtastic Muzi H1 REMIX - 1100mAh Version (No branding+ No Keyhole + optional Buzzer+ navigation switch + Belt clip)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for the Heltec V3 Lora board. Remixed to fit a 1100mAH battery + buzzer + navigation switch - Keyhole

Ocena
5 / 5
Polubienia
145
Pobrania
582
Wydruki
5
Wyświetlenia
6244
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

See changelog to see all the updates and changes I did.

__________________________________________________________________________

Original Muzi text for his Original H1:

Case for the Heltec V3 Lora board. Recommended to print in a Matte filament to provide more grip.

Tap the M3x0.5 post on the ‘Case Rear’, careful not to poke through the wall at the end.

Install the buttons, board, SMA Pigtail and snap the 2 halves of the case together.

Secure with a M3x12mm screw for a rock solid enclosure.

Fits:
- Battery 

https://www.makerfocus.com/products/makerfocus-3-7v-1100mah-lithium-rechargeable-battery-1s-3c-lipo-battery-with-protection-board-pack-of-4

- SMA Pigtail
- Your choice of SMA antenna up to 10mm in diameter at the base

 

Recommended components:
- Heltec V3 Board + SMA Pigtail + Stubby Antenna [https://www.amazon.com/dp/B076MSLFC9]
 

Dimensions:
- 45.5mm x 64.6mm x 19.5mm [1.79in x 2.54in x 0.77in]
- 22g [0.78oz]

 

 

Tagi