1 / 6
NOTSEK 54mm Bottomless Portafilter Tamping Station — zdjęcie 1
1 / 6

NOTSEK 54mm Bottomless Portafilter Tamping Station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted something that I could use as a tamping station that can hold my NOTSEK 54mm Bottomless Portafilter

Ocena
0 / 5
Polubienia
7
Pobrania
121
Wydruki
0
Wyświetlenia
1059
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

I wanted something that I could use as a tamping station that can hold my NOTSEK 54mm Bottomless Portafilter, Normcore 53.3mm Spring Loaded Tamper and a custom puck screen holder (that can be found here) that holds 54mm puck screens.

 

The top of the portafilter holding section should also be able to fit the Umikot (54mm Version) WDT tool with lugs (that can be found here) without having to remove the portafilter from the holder.

 

Check the images for some drawings with what I would think are the most important dimensions, so you can see whether or not this can be used for your own equipment.

 

What I have on the tamping station:

 

Please be aware that this will obviously be going near food related products, so please make sure you print in something that is food safe, or that you are at least aware that what you printed might not be food safe.

Tagi