1 / 1
aquila 3-prong knob dial replacement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
found the stock knob too slippery, this should help. Hole should be .22 to press fit onto the shaft. Scale as needed…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
found the stock knob too slippery, this should help. Hole should be .22 to press fit onto the shaft. Scale as needed depending on your machine I guess.
Print Settings
Printer:
aquila x2
Rafts:
No
Supports:
Yes
Resolution:
.15
Infill:
20
Filament: overture pla
matte black
Category: 3D Printer Accessories
