1 / 1
Adapter to install BigTreeTech SKR V1.4 in Wanhao Duplicator i3 (Replacing Melzi board) — zdjęcie 1

Adapter to install BigTreeTech SKR V1.4 in Wanhao Duplicator i3 (Replacing Melzi board)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter bracket to install a BigTreeTech SKR v1.4 and optional MOSFET in the Wanhao Duplicator I3 using the welded-in…

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
434
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Adapter bracket to install a BigTreeTech SKR v1.4 and optional MOSFET in the Wanhao Duplicator I3 using the welded-in mounting bosses intended for the stock Melzi board.
Note that the USB and SD ports do not line up with the original holes in the case; this is largely due to making the bracket fit within the print envelope of the Wanhao machine.

Tap the mounting pillars for the SKR and MOSFET M3 as required.
Print 4 washers to trap the bracket into position using the 4 original screws.

Edit 26/06/21: Added a picture from the CAD as the STLs are still not showing a preview. Also included a STEP version in case anyone feels like modding it!

Category: 3D Printer Accessories

Tagi