Golf 2 Central Console Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-Printable plate for the centralconsole of the Golf/Rabbit Mk2.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Best choise for adding instruments to your Golf/Rabbit !
Normal instruments are 52mm (2 Inch).
There are several versions. Please contact me if you have any ideas or suggestions on this ;)
Screws needed are 3-4mm (1/10inch - 1/6inch) plastic or sheetscrews
First of all print the holders and the alignment-plate. Screw the holders to the alignment-plate (you need to gauge them to fit to the alignment-plate).
Then stick the plate into the console as shown on the pictures and screw the holders to the central console (ratchet or short screwdriver needed).
Remove the alignment-plate and screw on the plate you want. You can also use the alignment-plate as a pattern to use wood or such.
Have fun.
Edit. Actually put that in my car LOL. Works nice :D