1 / 3
Manifold Garden Tower — zdjęcie 1
1 / 3

Manifold Garden Tower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modified and printable version of world_051 from the puzzle game Manifold Garden

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
383
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The model is split into 21 different stl files, each containing a part (or groups of similar parts) which are then printed separately to minimize the use of support material. Though some parts will still need supports and everything is already oriented optimally. Paint-on supports in slicer is highly recommended. It is then assembled afterwards using your preferred method (soldering iron, 3d pen, etc). Another much better option would be to print the full model using soluble supports if you have access to a multi-material printer. It should be about 20cm tall completed (if I did my math and scaling correctly of course).

 

Recommended Print Settings:

Layer Height -  ≤0.2mm

Layer Width - 0.42mm (0.4mm nozzle)

Material - PLA, any non-warping materials (+Soluble supports if your hardware supports it)

Print Temp - 205°C

Print Speed - ≤80mm/s Outer wall

Supports - Classic snug supports on certain models (see notes for each file)

 

I didn't make any detailed instructions with pictures or anything so you have to look at the 3d viewer as a reference. Also, part 01 starts at the bottom and 21 is at the top, so you could use the file names as a hint. I find this fitting for a puzzle game like Manifold Garden lol

The last picture is a screenshot of the in-game level using filters in photo mode that I took myself :)

The original model is not owned by me, it's from the game Manifold Garden. Go check it out, it's a really cool game

Tagi