Digimon Adventure: Tag & Crest (Interchangeable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now you too can relive your dreams of being a Digidestined.
- Ocena
- 5 / 5
- Polubienia
- 101
- Pobrania
- 680
- Wydruki
- 3
- Wyświetlenia
- 1791
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn’t believe this wasn’t already an available model! Here’s my version of the Tags and Crests found in Digimon Adventure, so you too can relive your dreams of being a Digidestined.
The tag is approximately 53mm tall, perfect for a necklace or keychain.
This prints as two separate pieces - the tag, and the crest - which can be combined following printing. Due to this, it's easy to switch out the different tags. It has quite a tight friction fit to hold the crest in place, this has worked on my BambuLab P1S but happy to make versions with other tolerances if people have issues.
For best results, use a 0.2mm nozzle. It should still be possible with a 0.4mm nozzle but be aware it will lose the finer details.
Printing tips
Nozzle size: 0.2mm
Layer height: 0.1mm
Walls: 4
Top shell layers: 6 or more
Bottom shell layers: 4
Infill: 8% Gyroid
Behind the model
I made this in SolidWorks with a variety of reference images, before printing on my BambuLab P1S. The tag is in eSun Silk PLA, the crests are eSun PLA+.