Subaru Forester 2010 Key Fob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement key casing for Subaru Forester 2010. This model should be compatible 2009-2013 Forester keys (untested).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
===> THIS STL IS FOR PLA <===
If you want to print it in ABS (which I would recommend because of its higher temperature resistance) you need to scale it by 101.6% in your slicer because it will shrink as it cools down.
Tolerances are VERY tight so to close your key I would recommend using a vice.
The casing is designed to be used with M2x8mm screws.
This model should be compatible with keys from all Foresters from 2009 to 2013 (untested).
Known flaws:
Screw hole is slightly misaligned (just the clips should be able to keep your key closed).
By MCH170