Star Trek: Discovery Tricom Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make the 32nd century multi-function device seen on the later seasons of Discovery.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 389
- Wydruki
- 5
- Wyświetlenia
- 1189
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Here you go. The 32nd century badge that has it all. PADD, tricorder, communicator, personal transporter, etc.
Revision April 28 2024 - Revised the whole model to look closer to the screen prop. Lengthened and given more depth. Was going to make the pips separate but they are so annoying to assemble which is why they are attached to the deltas. You can print the black pips separately for convenience--the deltas they work with have ‘b’ in the name. Follow printing tips below for best results.
You can make the ranks for crewman through fleet admiral. Ranks above captain have a shiny gold wedge, captain and below have a shiny silver wedge. Refer to the rank chart for proper colors.
Printing Tips
- Body - Print the body flat at .05mm layer height and used supports. Recommend 100% infill. You will need to do some support cleanup for the Delta to fit well but it should be easy to cut it out.
- Delta - The deltas don't look so good printed flat, so they are tilted at 45 degrees to be printed at .15mm layer height with supports.
- Wedge - The wedge is standing tilted for best quality with silk PLA. Use supports, 100% infill and .15mm layer height.
- Quality improvements - reduce external perimeter speed to 25mm/s and set filament extrusion/flow rate to .98 or 98%.
Uses 6x2mm magnets.
Display stand included.
PLA filaments used were:
Prusament Galaxy Silver - glittery silver with a top sheen
Ziro Silk Silver - shiny metal
CC3D Antique Gold - flatter but has a brighter gold top sheen
CC3D Silk Antique Gold - shiny brass look