Bed Headboard LED Aluminum Profile Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to hold a 16 x 7 mm led strip as a overhead bed light. Mounted by wedging it between a wall and a headboard.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Made to hold a LED aluminium profile above a bed as an overhead light or reading light.
Mounted by wedging the bottom of the part between a wall and a headboard. The part have a cable channel on one of the sides for routing a 3-wire 18 awg 2x6 mm cable that power and control the LEDs.
The LED strip used are SK6812 addressable, 144leds/m mounted on a 12 mm wide strip. Controlled by an ESP32 running WLED to create custom presets and animations on the led strip.
The part is designed to fit a 16 x 7/(8,8) mm (see picture) aluminium profile with some wiggle-room to slide the profile along the part.
Aluminium profile used: “Aluminiumprofil till LED-list LP7 BxH 16x8,8mm” Art.nr 6501809 from Hornbach in Sweden. https://www.hornbach.se/p/aluminiumprofil-till-led-list-lp7-bxh-16x8-8mm-2m/6501809/
In the included g-files the hook that holds the aluminium profile is printed solid with 100% infill. A version with a mounting hole in the bottom wedge is also available, both as g-files and CAD.
Pint Settings
Material:
PLA
Infill:
15%, Honeycomb
Layer height:
0.15mm, higher layer height will probably work fine
Outer Perimeters:
3 layers
Supports:
No