Dicey Stunt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dice tower that throws the dice through a ring of fire
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Throw your dice with style with this dice tower and impress the public. Push the dice down the slide, and see it fly through the ring of fire and land onto the target ! Works with marbles too. Will you dare do the stunt ?
To assemble this contraption you will need to print with your most beautiful PLA filaments:
- 1 slide
- 2 foundations
- 4 scaffolds
- 2 flags
- 1 ring holder
- 1 ring of fire (fuzzy skin makes it nicer)
- 1 landing pad (add a color change at 0.8mm to clearly show the bullseye)
Print with usual parameters, 0.2mm layer height works fine. Assemble as on the cover picture.
Dices on picture are not included in the set.
Source files can be found at https://cad.onshape.com/documents/2aa3a9adf9e1b37eeca5c163/w/0a93f696ff817bbb47984ace/e/342c9c51e0f2596a491a59a0?renderMode=0&uiState=662803f5072a007240baf8a5