Buran spacecraft struts for Energia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really wanted to attach properly my Buran and Energia printed models, so I had to make struts.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 417
- Wydruki
- 0
- Wyświetlenia
- 1970
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Should be printed on finest possible layer height because it is 1:200 scale, I used 0.08mm on Bambu Lab X1C and it worked well. You can try printing without supports I used them because I dont trusnt my printer with high overhangs.
After you printed the details just glue them on the main tank of the rocket, make 4 holes on the Buran lower body and just stick the struts inside. You can glue them together if you like, mine is siting just fine even standing straight.
ENERGIA model - https://www.printables.com/model/159957-energia/comments/1641355
Buran model - https://www.printables.com/model/810534-buran-spacecraft-bamboo-studio-multicolor