1 / 1
4 inch Coupler for LOC Precision Body Tube for High Power Rockets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A heavy-duty coupler for LOC 4 inch body tubes
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
LOC/Precision 4-in Body Tube Coupler
This coupler was designed specifically for the LOC/Precision 4-in (102mm) body tubes.
Dimensions:
- 99.3mm diameter
- 203mm high (8 inches)
- 3mm thick
It's a slip fit, meaning it will pass through the tube via gravity. Most couplers are friction fit, so rough it up and use a generous amount of epoxy for permanent installs or tape or rivets for temporary.
Adjust your infill to balance strength and weight.
Works perfectly with my 4-in AVBay Bulkheads