1 / 3
AEG Can Opener Spare Part magnetic lid holder — zdjęcie 1
1 / 3

AEG Can Opener Spare Part magnetic lid holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Often lost or broken: the magnetic lid holder of the AEG can opener

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Often lost or broken: the magnetic lid holder of the AEG can opener DOE 100 or DOE 102.

I scanned the broken part of our can opener (Shining 3D scanner) and restored it as well as possible.

Printing the part is a bit tricky due to the design. Without support, it won't work with FDM.

I recommend PETG, ASA, ABS or PC as the material. If you can, you can also use PP, but that would not be my first choice due to the flexibility of the material. The part is only attached to the device by clamping force.

Tagi