No Mess Cream and Soap Decanting Collar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pump action cream and soap dispensers always leave a useful amount of product at the bottom. So the obvious thing is…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 281
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Pump action cream and soap dispensers always leave a useful amount of product at the bottom. So the obvious thing is to turn the old one upside down, so it runs into the new one.
The problem is that this is slow, so you try to prop the top bottle so you can leave it for several hours to drain. Anyone who's done this knows it's difficult to balance the bottle. Even if it starts OK, it fails as the weight changes the balance, and you end up with a mess.
The no-mess cream and soap decanting collar solve this issue. The two containers are firmly and safely screwed together. At 90 degrees, maximum recovery is possible.
Suits containers with a 31mm diameter thread.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
200
Infill:
10
Filament:
[
3D Fillies PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=3D+Fillies+PLA&tag=thingiverse09-20) Pastels will go with your bathroom How I Designed This
I used Fusion 360's coil function to make the thread
Category: Bathroom