1 / 2
Torre Pot, Stackable planter — zdjęcie 1
1 / 2

Torre Pot, Stackable planter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stackable planter for small plants as strawberries, basil, or aromatic plants.

Ocena
0 / 5
Polubienia
26
Pobrania
148
Wydruki
0
Wyświetlenia
576
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I hope that this stackable desing helps you to put a bit of green on your life

 

  • PETG recommended
  • Tested with 3 floors, but although it can handle more then you will need to check how you are going to irrigate the lower floors.
  • The base is not mandatory, specially in the outside.
  • Two files. The first is for the pot floor, the second is the base. Print as many floors as you want.
  • It's sized to fit in a small build printer (170x170mm). Feel free to scale if you need it, but remember to put the same value in the two files.

Tagi