1 / 6
Prusa I3 R2 EVO Carriage Jig - Dima per carrello — zdjęcie 1
1 / 6

Prusa I3 R2 EVO Carriage Jig - Dima per carrello

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a carriage jig for owners of Prusa I3 EVO and Prusa I3 R2 V2. If you break the glass plate, you need to…

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a carriage jig for owners of Prusa I3 EVO and Prusa I3 R2 V2.

If you break the glass plate, you need to dismount the carriage and use it to

calibrate the 4 angle holders. This is a very delicate operation, in fact if you

wrong the position and glue with CA, one or more of the 4 holders, it's pratically

impossible to mount again the plate on the carriage and if you try to remove a

glued holder probably you'll break the glass!!!

I create this tool because using it, you avoid to dismount the carriage, I projected it

using the CAD file of the carriage directly from the inventor NicolaP.

Join the 2 sides glueing the triangles. After printing 8 supports, screw them in the holes

Category: 3D Printer Accessories

Tagi