Rubber Duck Keel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Swimming aid for rubber ducks.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 972
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
I've recently bought two rubber ducks from Amazon. Unfortunately, both of them weren't able to swim upright (Design > Function). This 3D Model works as a removable keel for rubber dugs.
I've printed it in PETG. It requires:
1x 30mm long stainless steel M4 rod
2x M12 washers (as a weight)
You have to pause the print at 7,2mm object height before the “weight compartment” gets its lid, to place the two M12 washers into the print. After this continue with printing.
After the print is complete you need to glue the stainless steel rod into the center hole of your print.
The stainless steel rod perfectly screws into the squeaking hole at the bottom of the rubber duck.