Ferrari Racing transporter, Typ Fiat 642 RN2 Bartoletti, 1957
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,92 € – 6,02 € netto (bez VAT)
Dla pliku: Ferrari Racing transporter, Typ Fiat 642 RN2 Bartoletti, 1957_Front_240x122_0.4n_0.08mm_PLA_MK4_6h30m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 5,47 € netto (środek widełek).
- Masa podana przez autora
- 47 g
- Czas druku podany przez autora
- 6,5 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
HueForge
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Standard Digital File License
The Courier of Enzo Ferrari
The 1950s and 1960s are known as an era that
witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia Ferrari and Maserati might well be the most famous and technically most mature transporters of those days. They were mounted on Fiat-bus chassis of the type 642 RN2. With an open body work designed by Bartoletti, the resultant transporter was good for hauling three race cars.
Back in those days, it took a transporter to haul race cars to the race track from time to time. But transporters were not limited to hauling a precious freight only. They had quite a few other functions, too. In each of the transporters, a small but complete inspection bay was set up. It was also used as the crew quarters.
This was where the head-quarters were located, in addition to providing a crew space and a sleeping berth during the hectic race weekends.
- 6-cylinder diesel in-line-engine type 364A
- Auto body work and vehicle hoist made by Bartoletti
- Fiat-bus chassis
| Maximum output: | 92 hp |
| Displacement: | 6,650 cc |
| Top speed: | 85 km/h |
| Total length: | 9,085 mm |
| Total width: | 2,492 mm |
| Total height: | 2,924 mm |