1 / 1
Command of Nature Erosion Tokens
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement to the wooden erosion tokens for those that want the lucky number 3.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement fix for the Command of Nature wooden erosion tokens to have the symbols representing 1 and 3 on both sides.
I've uploaded two slightly different STLs, feel free to choose either one based on your preference:
- Erosion token (flat): The erosion symbols on both sides have a depth of 0.01mm. Intended to make it easier to fill the symbol faces with different filament colours while retaining a flat surface when slicing.
- Erosion token (0.2mm): The erosion symbols on both sides have a depth of 0.2mm. This will create a slight indent in the surface when slicing with 0.2mm layer heights or lower. Choose this option if you are printing with only one colour.
Photo shows the flat erosion tile printed with a 0.4mm nozzle, 0.08mm layer height, and 10% infill.