camera hotshoe ball mount joint ballmount balljoint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked this small ball joint from diezopfe much and want to make me a small ball mount for my camera hotshoe from it.…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1051
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
I liked this small ball joint from diezopfe much and want to make me a small ball mount for my camera hotshoe from it.
+++Use a brim on the screw for better adhision+++
https://www.thingiverse.com/thing:4739696
https://www.thingiverse.com/diezopfe/designs
After my first mount worked well, you need some superglue for the tripod screw for coins. Glue and press it in.
My second attemt, was to make a silicon mold with my mold print. Slowly fill the mold with silicon. After curing, cut both sides for easyer removal.
Screw the tripod screw in the silicon mold and fill the mold with resin. First only around the screw, move it gentle that the resin can slip under the flat screw part. Then fill the mold to the top.
Print Settings
Rafts:
No
Supports:
No
0,4
Infill:
20
Category: Camera