3d Chameleon Clippy for Anycubic Kobra 2 Max
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom mechanical filament cutter for the Anycubic Kobra 2 Max
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 2271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom mechanical filament cutter for the Anycubic Kobra 2 Max based on the original Generic Clippy design from from the 3dChameleon creator.
The model works best when printed on it's right side ( this is the shorter side ) on the bed with support from the bed. Print with solid 100% infill
It requires purchasing a slightly longer screw to replace the one that connects the ground wire to the extruder motor.
Then there is a lip on the device that will allow the stock extruder cover to slip over it to hold the device securely in place.
It is designed to cut when moving the print head to X0 and reset when moving the print head to X430