Magnatic filterholder for Godox AD200 H200R and V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want more colorgels for my AD200 with the H200R round head. So i designt this magnatic version to easily mount self…
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 999
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I want more colorgels for my AD200 with the H200R round head.
So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters.
Print bouth parts and glue 2-4 magnets, round 3mm Diameter and 2mm hight, in the holes and sand the edges of this part for a tight fit.
Place the 2nd part on a table and put the filter in the pit bevor attaching the part with the magnets.
Now it holds perfect on the flashhead and you can switch easy colors.
New added:
- a protection cap for the roundhead without any magnets. And you can store the filter holder in the cap and mount it on the flash.
- a sphere dome for light diffusion. (Need to print with support)
- a grid that also made to hold a colorgel.
Print Settings
Rafts:
No
Supports:
No
0,2mm
Infill:
100%
Category: Camera