Dice-Shaped Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dice Tower shaped like a dice, with sloped exits and diversion pins in the center, made to look good and actually work.
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 415
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a dice-shaped dice tower that can roll the dice well and look good. The box does not need supports, and can be printed with as little infill as you like. On the inside, there are large pins that connect from side to side and those are used to bounce the dice around. These are connected via the holes in the sides of the Main Tower model. The bottom of the tower is also sloped to ensure that the dice don't get stuck. Finally, for looks, you can print the circular inserts for the sides of the tower and glue them on, if you want it to look better.
Standard-size dice will work. I hope you like it!