1 / 1
Gaggiuino 3.5 display front mount dual color hexagon pattern — zdjęcie 1

Gaggiuino 3.5 display front mount dual color hexagon pattern

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dual color hexagon front mount for the nextion 3.5. 25 degree angle.

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
521
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Slice in orcaslicer or bambu slicer. Print in petg or abs. 0.2mm layer height 4 bottom layers. If your printer doesn't have multicolor capabilities you can use orca slicer with the m600 gcode command to manually swap colors. The accent color is only on the first 3 layers. Mount it with magnets or 3m VHB tape. I used VHB tape to secure the display as well. 

Tagi