Cover for Raspberry Pi Camera Rev 1.3 for Pi Camera Mount v2.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified camera cover for TinkrMakr's camera mount. Includes STLs for moving the camera hole in case your model differs!
- Ocena
- 4,75 / 5
- Polubienia
- 2
- Pobrania
- 77
- Wydruki
- 4
- Wyświetlenia
- 439
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am told these Raspberry Pi cameras (and in particular the knockoff that I happen to own) have wildly varying dimensions. The one by martingeyer89 was almost right but the camera hole didn't line up for me. So I created this model to move the camera hole slightly towards the notch.
…and since the dimensions can vary, in case your camera is even slightly different from mine, I've included 2 additional files. One is a solid filled in version of the camera cover, and the other is a “camera hole” model. You can use the camera hole as a negative modifier with the solid camera cover to position the camera hole exactly where you want it!