Spiderman Kids Cutlery Box Print In Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print In Place Kids Cutlery Box with Spiderman Logo and magnetic catch
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Made this to try out print in place and pausing print to insert magnets.
It worked, kind of…. beware!! If you have a steel nozzle, it can mess your print by attracting the magnets you've placed inside (as you can see from the pictures) It still works as it should. I have since adjusted the size of the magnet holes to it should be a tighter fit.
Its made as a cutlery box for kids pack lunch box, but is effectively just a print in place magnetic box.
Printed on P1S with 0.2 layer height in PLA with supports on the chamfered edges.
Magnets: 6mm diameter / 1.5mm depth