Floor and Battery Mount for Chopper (C1-10P)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic floor brace and battery mount for the Mr Baddeley designed Chopper.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This brace and battery mount/case is designed to hold two(2) SLA (sealed lead acid) batteries to power your droid. The brace fits the standard Chopper frame from Mr Baddeley.
Print:
Recommended 3-4 perimeters (walls) with 10%-15% infill.
The ‘split’ version uses 6 x M3 (10mm) grub screws for alignment and strenght. Two part epoxy is recommended.
Usage:
The brace and bracket is oriented to that the batteries are in the front of the droid. The brace has a mounting holes that line up to the existing frame holes. To secure the brace to the droid, increase the lenght of the bolt to bond the brace to the lower body pieces.