Desktop stand for MiniFCU (MiniCockpit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable desktop stand raises the FCU to a more natural height off of the desk.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple mount for the miniFCU that raises it up off the desk and at a slight angle for ease of use (for those of us without full fledged sim cockpits).
The unit mounts to the top using the standard VESA mount and the suction cups that come with the unit can be installed to the bottom of the mount.
Designed for and printed on a Prusa MINI+
.40mm Nozzle, .20 mm layers and 25% infill
I recommend printing it standing up on end. In this orientation supports should not really be necessary, though that depends on how well your bridging works. Though even if you have a messy bridge, the area in question is neither visible nor functional\structural.