Impossible table repair Customizeable (.scad)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This impossible repair of two broken tables looks normal from the distance - but causes confusion when you come closer
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 581
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
You have 2 broken tables with 2 missing legs?
Don't throw them away, it may be possible to repair them with a rope and get a slightly higher presentation table for your 3D models as a result ;-)
Inspired by the Impossible Table I developed this impossible repair of two tables with missing legs which look quite normal from the far distance - and cause confusion when you come closer.
I added the FreeCAD file and also recreated this in OpenSCAD to allow you to adapt it to your needs.
You have never customized a thing?
Don't worry, I optimized this thing for easy customization.
Just follow the instructions in the last picture, install OpenSCAD (only 50MB) and customize it with a few clicks there
Notes:
It is important that the legs don't bend too much. Use more wall layers than normal e.g. 5 layers.
For assembly thin enamelled copper wire works best, sewing thread is also OK, fishing line makes it more difficult to assemble.