1 / 1
Spacer for Hoymiles Inverter (HMS-1600-4T)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for mounting a Hoymiles PV Inverter on the wall. This was designed with the dimensions of the HMS-1600-4T model.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 935
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (24)Powiązane
Spacer for mounting a Hoymiles Inverter on the wall. This was designed with the dimensions of the HMS-1600-4T model, but may fit on other models as well.
There are two variants:
- One which resembles the slots on the inverter.
- One with two mounting holes instead of the slots. This avoids the inverter sliding out of the screws while mounting.
I used PETG for improved temperature resistance.