1 / 2
Flex Filament bypass
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Load Flexible filaments on your XL with ease
- Ocena
- 5 / 5
- Polubienia
- 193
- Pobrania
- 873
- Wydruki
- 36
- Wyświetlenia
- 7870
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 36) (Komentarze: 45)Remiksy (6)Kolekcje (377)Powiązane
This part will allow you to bypass the side filament sensor and ease the loading of soft filaments into the tool head.
to turn off the Side Filament Sensor go to Settings→ Filament sensors → Side Filament Sensor [1-5] depending on where you load the flex material.
Print instructions
- Download the latest PrusaSlicer and use the following settings**:
- print settings: 0.20mm QUALITY
- filament: PETG (tested on Prusament)
- 15% grid infill
** Note that print settings are recommended, but you can experiment with your own.