1 / 3
Drawer inlay for spice containers (Fuchs)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drawer inlays for spice containers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This drawer inlay was made with Fuchs spice containers in mind.
- spice containers are supported on two sides to prevent sideways motion
- gap (sideways) between containers: ~ 15 mm
- chamfer 4x4 mm at the bottom for drawers with chamfers or fillets on their sides
- dimensions of organizer with 3 columns:
- width: 220.5 mm
- depth: 160 mm
- height: 10 mm
- dimensions of organizer with 2 columns:
- width: 147 mm
- depth: 160 mm
- height: 10 mm
The organizer on the picture was printed with the following settings:
- Filament: PETG clear
- Infill: 15 % Grid (setting in PrusaSlicer: 0.2 mm Speed)
- Layer height: 0.2 mm (setting in PrusaSlicer: 0.2 mm Speed)
- no supports
One can think of printing without bottom layers to speed up printing and reduce material consumption.