Orbital Sander Vise holder (TACKLIFE PRS02A)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotary Sander Vise holder (TACKLIFE PRS02A) to convert it to a Bench sander
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Rotary Sander Vise holder (TACKLIFE PRS02A) to convert it to a Bench sander for a fraction of the cost.
3D print with support in the position described in the photo of the parts inside my P1S printer. I prepared to allow to reinfoce with 4mm aluminium rod or threaded rod to improve rigidity. there are also channels to reinforce with 2mm wire. Reinforcing isn't mandatory but recommended.
Use 2 M8x35 screws to with nuts and washers to fix the two half's together
Related models
If you found this interesting maybe you would like Vaccum cleaner adapters I made for the same orbital sander.