1 / 1
Battery extractor / crowbar (18650 and others)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nothing more annoying than extracting 18650 batteries from their super tight holders. Unless you have a crowbar.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 273
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Makers and rechargeable batteries are a common combination — just as common as the frustration when you have to extract such a battery from its holder. For this reason, I was quite puzzled when I saw that there was not a tool in Printables for the job. So I designed a very simple one.
Print with 100% infill, I used PLA but probably any material would do. You might need a brim. Tested with 18650 batteries, probably OK with any other similar shaped ones.