1 / 4
RC Airless tyre and rim (12mm hex) Tarmo5 (2 sizes)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this 74mm tyre and rim set for my Tarmo5. The assembly is really simple and requires 5 M3x10 screws.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 206
- Wydruki
- 3
- Wyświetlenia
- 943
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (32)Powiązane
You can print the PLA rim without supports.
For the tyre I recommend the supports only from the printing table.
There are two sizes: 34mm and 43mm wide.
You can find all measurements in one of the images.