Collapsible Webcam Stand | Telescoping | Screw to Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collapsible Webcam Stand — From about 45mm collapsed to 300mm fully extended
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 183
- Wydruki
- 1
- Wyświetlenia
- 919
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Latest files are available on MakerWorld. Get the full Plate Print Profiles with settings known to work:
https://makerworld.com/en/models/436093
===
Control the height of your desktop webcam with this adjustable webcam mount. — From about 45mm collapsed to 300mm fully extended
This model is mostly Print-In-Place with the exception of the Top & Cam Screw.
It is recommended to print the Tolerance Test first to make sure the mechanism will work for you.
====
After printing, make sure to push from the bottom to free the individual cylinders.
Feed the Cam Screw through the Top & attach to Webcam. Pull out the smallest cylinder and screw to attach.
===
Once assembled, lift and screw-lock to the desired height.
====
IMPORTANT - Please pay attention to the screw-loosening and screw-tightening directions.