Aya Neo Thick Grips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thicker variation on my Aya Neo grip
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1025
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Created these in an attempt to make something a little more comfortable than my previous grip. I think I succeeded, though I'm still considering thickening the top section somewhat.
Since there are so many curves on here, smaller layer heights make a huge difference in final quality. The photo is at 0.64mm layer height for fast prototyping, and has noticeable stepping on the top and bottom of the model.
Still mounted with command strips, though any form of 2 sided tape should work.
Dec 7 Update: Created a version with built-in supports for using with printing services. The supports are a lot more difficult to remove and require some more effort to fully clean up, but they will work in a pinch.