Letterboard Fonts - 1/2, 3/4, Full 1-inch peg spacing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are font sets scaled for letterboards using English spacing (rather than metric).
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
The original model is a terrific font set, but for some existing letterboards, such as what is in my office, the peg spacing is set to english measurements: half-inch, 3/4-inch, 1-inch.
I used Cura for a quick-and-dirty initial scaling, then Fusion 360 to change the pegs on the 1" version.
I put all the models into zip files to assist with organization, the the individual files are also uploaded. Each zip file is labelled by size;
I used Cura for a quick-and-dirty initial scaling, then Fusion 360 to change the pegs on the 1" version.
- The half-inch files all start with "H - "
- The 3/4-inch files all start with "Q - "
- The 1-inch files all end with "half-peg."
NOTE: The slight stringing in the cover photo was fixed about 1 minute after the photo.
