Filamentspulenhalter für Prusa MK-Drucker/ Filament spool holder for Prusa MK printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
3,30 € – 4,04 € netto (bez VAT)
Dla pliku: Filamenthalter quer_0.4n_0.2mm_PETG_MK3.5_3h8m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,67 € netto (środek widełek).
- Masa podana przez autora
- 61 g
- Czas druku podany przez autora
- 3,14 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Die Aufhängung der Filamentrolle ist in Querrichtung/ The suspension of the filament roll is in the transverse direction
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 429
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Diese Halterung für die Filamentspulen wird auf den Rahmen des MK-Druckers montiert, so dass die Spule in der Querrichtung des Druckers liegt. Ich benutze diese Halterung hauptsächlich für TPU-Filamente, da meine übliche Halterung oft etwas schwergängig ist und das Filament in die Länge zieht.
Fertige Lösungen haben meiner Meinung nach einen kleinen Nachteil: Die Vorrichtung zur Befestigung an der Druckerstrebe könnte sich bei Belastung aushaken. Deshalb habe ich sie umgekehrt konstruiert, so dass sich die Halterung bei Belastung abstützt. Außerdem gibt es eine Aussparung, in die man einen Schraubendreher stecken kann, um die Demontage zu erleichtern.
Zur Orientierung: Bei meinem Drucker hat die obere Strebe die Maße 40,4mm x 6,2mm.
Translation: DeepL
This holder for the filament spools is mounted on the frame of the MK printer so that the spool lies in the transverse direction of the printer. I mainly use this holder for TPU filaments, as my usual holder is often a bit stiff and pulls the filament into the length.
In my opinion, ready-made solutions have a small disadvantage: the device for attaching to the printer strut could unhook under load. That's why I designed it the other way round, so that the holder is supported when under load. There is also a recess into which you can insert a screwdriver to make removal easier.
For orientation: On my printer, the upper strut measures 40.4mm x 6.2mm.