#0146 Cable Management Clips for Original Prusa Enclosure (OPE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds more cable management without the need for zip ties.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 126
- Wydruki
- 4
- Wyświetlenia
- 718
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!
**********
As part of my automatic active heater project for the Original Prusa Enclosure (available soon!) I needed a way to manage wiring that allowed me to clip in and out various locations in the enclosure. I came up with this strong and discreet clip which is quite versatile in 2 versions:
- Fits wiring with jackets 2.5 - 4mm diameter. Fits up to 3x 3mm jacket diameters per loop snuggly but not too tight.
- Fits wiring with jackets 1.5 - 2mm diameter. Fits up to 4x 2mm jacket diameters per loop.
NOTE: typically, 16GA wiring has 3mm jackets.
Recommendations:
- Print using PETG/ABS. Expecting this enclosure to be around 55°-60°C after the heater is added, PLA will not last long with these temperatures.
- 0.2mm layers and 0.4mm nozzle works well.
Other things you'll need:
- M3x6 or M3x8 screw. (Use the spare black ones left over from your Prusa Enclosure kit.)
**********
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!
P.S. Please post some constructive feedback if you'd like to see something improved.