Vacuum cleaner floor nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vacuum cleaner replacement nozzle for 32 mm tube
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 170
- Wydruki
- 1
- Wyświetlenia
- 837
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Vacuum cleaner floor nozzle as replacement. My old nozzle was scraping the flooring so quick design ended up in this nozzle that sucks. (Pun intended).
Design includes ball joint to allow flexing in all directions. However use scaling to adjust if the fit of ball joint is too loose or tight.
Width of the nozzle is 250 mm for which reason i printed it on my SV06 upright with organic tree supports.
I used PTEG for the nozzle and shaft and TPU for the wheels and skirt.
M3 with suitable length is used to mount the tires. Tap the holes before use, or drill and use glue.