1 / 11
Disco Ball Motor (Rechargeable 6Ah)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find a decent consumer rechargeable disco ball motor with remote, so I made this one. Some parts are overkill
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This has overpriced parts and is overkill for the purpose, but hey it should last a long time. A few notes.
- The motor rotates at ~1 rpm which is the ideal speed for a 20+ inch disco ball.
- The batteries last about 25 hrs of active usage before needing a recharge.
- I'm using an IR remote triggered relay to activate the motor.
- Details of the build are in the attached PDF
Demo Videos
Print Settings
- PETG (BambuLab basic)
- 0.2mm w/ 4-7 perimeters
- normal supports
Materials
Materials list and links will be in the attached pdf. The parts are overkill so might be worth sourcing cheaper materials.
If there is any interest in purchasing a pre-built version, let me know in the comments and I'll see what I can do.
update:
- 5/6/24 added remote control sleeve so the remote is less ugly.