1 / 4
DJI Mini 2 sunshade fixed to the pipes of a DJI controller
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This modification fixes the main part to the pipes of a DJI controller.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
The modification uses
M3 nuts, ISO 4032 and
M3x12 screws, ISO 1207.
The cutouts for the nuts are tight. The nuts should stay in there position even when no screws hold them.
A screw should be used to draw the nut into the cutout.