Sieve with 2mm hex holes, 210mm diameter, 70mm height.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Originally modeled to separate my cat's litter dust from the filler that is still ok to use, but can fit any purpose.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Fits MK3-MK4 build plate as its outer diameter is 210 mm (no space for brim - but doesn't need it). Hexagonal holes are 2mm (between flat opposing sides). The mesh depth is 3mm which is sturdy enough to hold cat litter (I needed something to separate the dust of the soya/tofu cat litter from the usable pellets).
Printed in PLA, 0.4 nozzle, 10% infill, no brim, 0.3 layer height on Speed preset of MK4 - worked out flawlessly. I set number of perimiters to 3, but I guess 2 will be ok too.
A bit lengthy print that take around 12 hour due to the hex structure
