1 / 6
Ridgid Jobsite Table Saw Miter Bars 1/4" and 3/8" sizes — zdjęcie 1
1 / 6

Ridgid Jobsite Table Saw Miter Bars 1/4" and 3/8" sizes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I liked the edits on the featherboard done by r00nee, but the miter bars didn't fit in my Ridgid table saw miter…

Ocena
5 / 5
Polubienia
104
Pobrania
419
Wydruki
1
Wyświetlenia
2403
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I liked the edits on the featherboard done by r00nee, but the miter bars didn't fit in my Ridgid table saw miter slots, so I edited in order for them to fit.

While I was at it, I changed the bottom of the bar to hold either 1/4-20 Hex nut or 3/8-20 Hex nut bolts. Just add a dab of glue, insert your bolt, and you're good to go.

If you get elephants foot or first layer squish, you may have a tight fit, so just lightly sand down the sides and it should slide in smoothly.

Update 3/11/21 - Added a sample print if you want to see if these bars will fit with your non-Ridgid table saw miter bars.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

Yes

Resolution:

.3

Infill:

15

Category: Tools

Tagi