1 / 2
Cup Stabilizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cup stabilizer is modeled after anti-tip cups that were popular in the 1970's.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a simple easy to print, cup stabilizer that makes it very difficult to tip your cup or bottle over. I've used one for several years on my North stainless steel cup to prevent tipping.
Resize it to the diameter that you need for bottles, cans, water containers, etc., in your slicer. The internal ridges are to make it easier to slide off as it stays on the container securely when sized properly.
Slicer Settings Used (Cura)
- Material - TPU or PLA. Works fine with either one.
- Layer height - 0.28
- Wall Line Count - 2
- Top Layers - 4
- Bottom Layers - 4
- Infill density - 10%
- Support - None
- Build Plate Adhesion - None